fresadoras usadas para venda (2,490)

Type: C1050 3 Axis Machining Center Year of construction: 2010 Machine type: Machining center Condition: energized, ready for immediate use. Operating hours: approx. 29800h Spindle hours: approx. 9000h Control: iTNC 530. Spindle Rotation Number: 10,000rpm Tool magazine: 30 x-axis (mm) 1,050 Y-axis (mm) 530 z-axis (mm) 630. Spindle/Table Distance (mm) 85-715 Accessories: Documentation Chip conveyor Coolant Setup Tool changer 30 pos. incl. tool holder Linear scales in all axes X / Y / Z 3D Buttons electr. Handwheel . Incl. tools in the turret Note: without vice! Auction-ID: A7-49053-24

Machine is already ready for transport and can be assessed on viewing day. Workbench with magnetic plate and milling tool not included Auction-ID: A1-48648-9

feed X-axis 5000mm/min feed Y-axis 7000mm/min. Machine already ready for transport, machine to be assessed on viewing day. Needed for transport 1x low-loader and 1x curtain-sided trailer Pick up machine by appointment machine already ready for transport and to be viewed on viewing day for correct assessment Auction-ID: A1-48648-90

machine ready for transport and to be assessed on viewing day. Machine clamp not included Auction-ID: A1-48648-105

machine ready for transport and to be assessed on viewing day. 3 extra loading meter / cooling tray / adjustable feet and books. Chip conveyor not included Auction-ID: A1-48649-39

Equipped with: Siemens Sinumerik CNC control, 2007 Rittal SK 3304142 cooler, 2007 Knoll FKA/350 refrigerant system (116x83x150cm), 350 litres, 2.2 kW, 3×400 V, serial number 349718, Knoll chip conveyor type 350 K-1/100, year of manufacture 2000, serial number 88972; (450x110x184cm) Auction-ID: A1-41279-1

Technical data Manufacturer: Friedrich Deckel, Munich Type: FP1 Design: conventional universal tool milling machine Travel X / Y / Z: 300 / 150 / 340 mm (Source: Online research) Spindle speed range: 40–2,000 rpm, 16 steps (source: online research) Feed range: 10–500 mm/min, 16 steps (source: online research) Tool holder: standard taper 40 for normal version; Special version Morse taper 4 possible (Source: Online research) Clamping surface: 195 × 600 mm for normal version (source: online research) Drive power: 1 / 1.4 kW in the researched version (source: online research) Net weight: approx. 660 kg including control cabinet (source: online research) Configuration With vertical milling head, T-slot work table, manual handwheels, mechanical speed and feed selection as well as CEE connection plug as shown. Remarks The machine comes from a plant closure, was actively used in productio ...

Milling head tiltingly adjustable, including tool trolley with tool holders, including: collet holders, push-on milling holders. including clamping tool and work table with contents; Auction-ID: A1-49001-1

Auction-ID: A1-41279-6

INDUMA MBM-22 Bed Milling Machine, Milling Bench, Large Capacity Milling Machine, with HEIDENHAIN TNC 355; With many accessories. Can also be used conventionally in manual mode; Voltage: 380 volts; Table size: 2200x900mm; T-slot: 18mm; Travel X-axis: 2000mm; Y-axis travel: 900mm; Travel Z-axis: 900mm; approx. 15t Auction-ID: A1-48979-3

max. workpiece diameter: . mmthreading length: . mmmax. module: 10 min. module: 1 diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/minVarious reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines.- Heavy-duty gear hobbing head ApFW (reconditioned)- Heavy-duty thread milling head ApGs (reconditioned)- Thread milling head ApG (reconditioned)- ApGi internal milling head (refurbished)- Various bushing sets- Lunettes- Counterholder with 3-jaw chuck- Various milling mandrelsand much more, as shown in the picturesIf you are interested in individual items or the entire package, please send me your price proposal.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49001-9

GOLDMILL 3-VS Milling Machine, Milling Machine, Milling; with Rohm machine clamp; Voltage: 380 volts; Recording: iso 30; Revolutions: 70 - 4200 rpm; Table size: 1270mm x 250mm; Travel X-axis: 760 mm; Y-axis travel: 370 mm; Z-axis travel: 370 mm; ARBO: yes Auction-ID: A1-48979-16

Brüder Mannesmann Flachdübel-Fräse including matching accessories. Auction-ID: A1-41279-707

Machine features: br> 2 pallets with 4 pieces of Schunk intake each Tools included, see photos Mayfran Chip Removal, including container machine can still be seen working Available immediately Auction-ID: A1-47358-43

With accessories Auction-ID: A1-49382-30

Table power supply X-Y axis: 8-400 mm/min. Table power supply Z axis : 4-200 mm/min. Eilgang X-Y shaft: 2400 mm/min. Electrical flux Z axis:1200 mm/min. Heidenhain readout with probe Auction-ID: A1-47358-173

Auction-ID: A1-41279-507

Auction-ID: A1-49001-8

Incl. accessories, consisting of: a.o. INTERLIFT - TMF300/ 600 - Filter system, dimensions (LxWxH) approx: 1550x1400x1600 mm, weight approx. 450 kg LAHNTECHNIK - OKM 593-331 - Heat exchange station, dimensions (LxWxH) approx: 1000x760x1600 mm, weight approx. 190 kg KNOLL - 340 K-1/205 - Chip Conveyor HASLINGER - ChipCarrier SQ 450 - Chip trolley, dimensions (LxWxH) approx: 1100x950x1030 mm, weight approx. 99 kg ROEMHELD - Hilma EL 160 - Machine Vise DELBAG - KNA/W 1/1-AFec-re - Filter extraction Workbench, with contents, dimensions (LxWxH) approx: 1210x600x850 mm Auction-ID: A1-49674-1

x-travel: 17700 mmy-travel: 4755 mmz-travel: 800 mmmilling width: 3450 mmdistance table - vertical milling spindle: 3682 mmtable height over floor: 500 mmspindle diameter in front bearing: 200 mmturning speed range: 12 - 450 U/mintool taper: ISO 60 axial adjustment of the spindle slide: 800 mmcreep feed: 5 und 50 mm/minfeed stepless: 10 - 3000 mm/mincross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minrapid traverse: 10 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minvertical adjustment of cross beam: 3682 mmrapid traverse: 1,5 m/mincreep feed: 1,25 und 12,5 mm/minfeed stepless: 5 - 1500 mm/mintable-size: 17800x2800 mmcolumn daylight: 3600 mmControl: SIEMENS 840 C table load: 50.000/100.000 kgdrive of main spindle: 100 kWtotal power requirement: 170 kWweight of the machine ca.: 300 tdimensions of t ...

Powerful brushless 1.5 kW motor, Belt drive, Compact, precise drill milling machine with variable speed, Pinole with fine adjustment, Stepless electronic drive, Solid and precisely finished cross table, large dimension, Drill milling head rotatable ± 90°, Solid dovetail guide for the best stability and extreme precision, Easy to read measuring ruler on the cross table, Digital depth stop, accuracy of the display 0.01 mm, mm/inch, Digital Spindle display, Emergency stop button (CE), Parts list manual, Mounted coaster Auction-ID: A1-48552-144

Auction-ID: A1-49175-2

FPT origin milling machine 3-axis vertical Strokes 2500/860/700 spindle 2500 rpm ISO 50 spindle External coolant. Outdoor air Heidnhain Control 3.30 Installation area 6000mm X 5000 mm Height 3500mm Auction-ID: A1-49175-1

3-axis digital readout brand SINO, Automatic longitudinal feed work table, Drill chuck with pin ISO30 - B16, Left / Right switch, Spindle protection, Fine adjustment, 2 Speed motor, Expulsion pin, LED work light, Cooling system, Tap function, Digital depth stop, Milling head motorically adjustable in height, Various tools in case, Manual with parts list Auction-ID: A1-48552-25

Auction-ID: A1-49175-3

Powerful brushless 750W motor, Belt drive, Compact, precise drill milling machine with variable speed, Pinole with fine adjustment, Stepless electronic drive, Solid and precisely finished cross table, large dimension, Drill milling head rotatable ± 90°, Solid dovetail guide for best stability and extreme precision, Easy to read measuring ruler on the cross table, Digital depth stop, accuracy of the display 0.01 mm, mm/inch, Digital Spindle display, Emergency stop button (CE), Parts list manual, Mounted coaster Auction-ID: A1-48552-109

QUASER MV154P/15 vertical CNC machining center equipped with FANUC 18iMB control, intended for precision machining in industrial production. This type of machine is used for CNC milling of complex metal parts, in small or medium series, with high precision and reliability. The FANUC control is a recognized industry standard that ensures flexible programming and broad compatibility with existing industrial environments. Ideal machine for: General Mechanics Workshops precision CNC machining Industrial subcontracting Production of technical parts Milling of metal components The Quaser brand is known for offering robust and reliable machining centers that are adapted to the requirements of modern production. Auction-ID: A1-48554-7

Auction-ID: A1-49365-58

vertical and horizontal table feed: 150 mm,max. diameter of the machined gear: 125 mm,max. width of the machined gear rim: 140 mm,max. length of the machined gears: 300 mm,max. module of the machined gears: 2.5,max. helix angle of the machined gear teeth: 45 degrees Auction-ID: A7-49398-42