mandriladoras e centros de usinagem usadas para venda (3,170)

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 610 mmControl: Heidenhain TNC 426 / 430 NC 2-Ax Dividing Head: ATS 200 / Sph. 200 mmmeasuring feelers - electric: Vorbereitung IR Meßtaster tool piece magazine with: 24 x SK 30 turning speed range: 50 - 18.000 U/minhigh-pressure pump: KNOLL KTS 25-38-T / ca. 5 kWchip conveyor: KNOLL 300 K-1/400 FKA 270 total power requirement: 20 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 3,52,53 mSonderpreis bei Übernahme ab WerkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mmy-travel: 2500 mmtable-size: 2.000 x 2.500 mmtable weight: 20.000 KgB-axis (table): (0.001º) mmw-axis: 2000 mmz-axis: 800 mmrapid taverse: 10.000 mmtaper ISO: ISO 50 turning speeds: 0-2.000 U/minspindle drive motor: 37 kWTorque: 12–183 U/min 0internal coolant system feed: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 74 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 270 mmbore stroke: 130 mmtaper MK: 3 MKtable-size: 500 x 350 mmfeeds: mm/Uturning speeds: 100 - 2750 U/minconnected load frequency: 400 Vtotal power requirement: 1,1 KWweight of the machine ca.: 0,22 tdimensions: 0,8 x 0,6 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 230 mmbore stroke: 130 mmtaper MK: 4 MKtable-size: 400 x 315 mmfeeds: mm/Uturning speeds: 105 - 1257 U/mintotal power requirement: 2,55 KWweight of the machine ca.: 0,35 tdimensions: 0,8 x 0,6 x 1,95 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: NCT table-size: 700 x 500 mmcoolant: ja Tool bore: SK 50 2 clamping devices20-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: SK 30 mmx-travel: 420 mmy-travel: 240 mmControl: Heidenhain TNC 355 total power requirement: 10 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 5356Vertical drilling and milling machineFEHLMANN Picomax 51 CNC 3Working area: 420 x 240 x 120 / 450Drive: 4 kWControl: Heidenhain TNC 355Table 720 x 280 mm / 120 kg loadSpindle holderSpeed range 55 - 9,000 min-1Space requirement approx. 3 x 2 x 2.4 mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 102 - 2000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mCompact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmControl: HAAS Number of working hours: 10.000 / 5.000 hswivable table:: Ø 630 x 500 swivelable +/-: +120/ -35 x 360 °Interference circuit diameter: 680 mmtotal power requirement: 22,4 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 5 3 3 mWIPS tool - measuring probeChip conveyorSpecial price EXW / from foundation 02791 ODERWITZList price ex warehouse FCAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtable-size: 760 x 510 mmworkpiece weight: 1350 kgspindle taper:: SK 40 spindle turning speed range: 15000 U/minspindle motor: 9 kWdistance spindle /table: 150-760 mmrapid traverse: 38/38/32 m/minControl: WinMax 5 total power requirement: 19 kVATotal weight, approx.: 5000 kgdimensions of the machine ca.: 2,3 x 2,95 x 2,55 m3-axis machining centre with electric spindle (D series) equipped with:- WINMax 5 CNC control with 3D simulation graphics & handwheel- 30-fold Toolchanger (SK 40)- Chip conveyor- Renishaw probe- Dynamic diret tdrives on all axes- High-pressure cooling system- Spindle coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmControl: FANUC 31i-B spindle turning speed - stepless: 15000 U/minspindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kWpallet table size: 500 x 500 mmworkpiece weight: 500 kgdistance spindle center to table: 80 - 810 mmRapid Travel X / Y / Z-Achse: 60 m/mindimension of workpiece: 800 x 1000 mmtotal power requirement: 80 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,45 x 2,68 x 2,88 mHorizontal CNC machining centre- CNC control FANUC 31i-B- Tool changer 60-fold (BT 40 Big Plus)- 2 pallet changer(pallet 24-M16)- Table / Pallet indexing Full B axis.- Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m.- Coolant/Filtering Unit- Chip Conveyor- ExhausterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore depth: 500 mmtable surface area: - mmspindle speed:: 1 dimensions of the machine ca.: - mmxmmxmmweight: - tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1140 mmy-travel: 710 mmz-travel: 610 mmCNC-control: Heidenhain TNC640 table-size: 1300 x 700 mmmax. table load: 1000 kgspindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/minfeed stepless: max. 10.000 mm/minrapid traverse: 24/24/24 m/mindrive capacity - spindle motor: 7,5 / 11 kWtool change unit: 30 Pos.coolant: IKZ 40 bar chip conveyor: kWvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,25 x 3,08 x 3,00 m- Serial No.: 4P11152J1- TSC 40 bar incl. 600 liter coolant tank with paper band filter unit- Y-Axis with 4 liear guide rails!- X- and Z-Axis with 6 roller supports for each axis!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 1000 mmy-axis: 500 mmz-axis: 500 mmdividing head: CNC Axles: 4 spindle taper ISO: 40 table surface area: 1200x508 mmTable load: 600 kgcontrol: Fadal CNC 88 HS Number:: 9505858 turning speeds: 40-7500 U/minTool changer: 21 Tool changer: 20-fach The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

x-axis: 550 mmy-axis: 450 mmz-axis: 375 mmcontrol: SIEMENS 840D SL spindle turning speed range: 1-17.500 U/minweight of the machine ca.: 10 tdimensions of the machine ca.: H 6,30 x 3,85 x 3,70 mThe machine is designed for friction stir welding.Reinforced Z-axis (5000 N) required for the welding process.Spindle speed increased to 1-17,500 rpm.including swivel axisOperating hours: approx. 11,111 h.Spindle running time: approx. 4,116 h.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 620 mmz-travel: 520 mmtool taper: 2500 x 600 mmcontrol: 2000 kgtool magazin:: SK40 rapid traverse: HEIDENHAIN table-size: 30 - 8000 U/minfeed: 45 m/mintotal power requirement: 45 m/minworkpiece weight max.: 20 kWdiameter of tools max.: 10500 kgtool length - max.: 5400 x 3300 x 3000 mmEquipment:- Heidenhain iTNC 530 control system- Tool magazine with 30 spaces- Chip conveyor- Screen filter system with IKZ- Operating instructionsOptional (on request):- Radio probe (Heidenhain)- Tool measurement system (Heidenhain TT 160)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.060 mmy-travel: 610 mmz-travel: 610 mmcontrol: Winmax 9 (Upgrade)table-size: 1.270 x 610 mmmax. table load: 1.100 kgnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 100 mmturning speed range - milling: ~ 10.000 U/minpower capacity - milling spindle: 18 / 11 kWtool taper: SK 40 Tool changer: 24 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 120 mmmax. tool length: 300 mmmax. tool weight: 7 kgfeed: ~ 15,4 m/minrapid traverse X-axis: 30 m/minrapid traverse Y-axis: 30 m/minrapid traverse Z-axis: 20 m/minweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,2 x 3 mChip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - VerticalHURCO VMX 42The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmCNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mmmax. table load: 700 kgspindle taper ISO: BT-40 spindle turning speed range: 12.000 U/minfeed stepless: 24.000 mm/minrapid traverse: 36/36/30 m/mindrive capacity - spindle motor: 15/11 kWtool change unit: 24 coolant: IKZ 20 bar chip conveyor: voltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,35 x 2,20 x 2,67 m- Serial No..:M281361B5N D- NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 830x320x1660 mmWeight: 56 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 570x870x1710 mmWeight: 143 kgTotal power requirement: 1,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 120 mmx-travel: 1250 mmy-travel: 1250 mmz-travel: 800 mmspindle taper ISO: SK50 number of spindle speeds: Max. 2000 min-1bore spindle stroke: . mmmain drive motor: . kWturning speeds: . U/minFeed: . mm/minControl: Heidenhain type: iTNC 430 T-slot - width: . mmT-slot - distance: . mmtable surface area: 1000x1000 mmTable load: 4000 kgtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMachine number: 62099The machine table can be rotated continuously via fixed control.Tool magazine has 40 positions.Conversion from Bosch NC System 5 to Heidenhain iTNC 430 approx. 2000The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane cap ...

x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: SIN 840 D SiemensB - axis: +/- 110 x 0,001 °C-axis: 360 x 0,001 °feed X/Y/Z-axis: 1 - 20.000 mm/minrapid traverse X/Y/Z: 40,00 m/minspindle turning speed - stepless: 20 - 8.000 U/mintool taper: SK40 power capacity at 100 % load: 13,50 kWpower capacity at 25 % load: 23,50 kWmax. torque at 10% load: 85,00 Nmmax. torque at 25% load: 150,00 Nmtable surface area: 2.920 x 740 mmnumber of T-slots: 7 T-slot - distance: 100 mmT-slots: 1x 18H7 / 6x 18H12 integrated rotary-table: 750 mmtable load of rotary table max.: 500 kgtool magazin:: 60 tool diameter: 80,00 mmwotkpiece diameter with 2 vacant positions: 130 mmtool length - max.: 300 mmweight of tools max.: 6,00 kgtotal power requirement: 57 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: 10,50 x 6,60 x H2,70 m5-axis simultaneous machining center with SIEMENS SINUMERI ...

x-travel: 1800 mmy-travel: 510 mmz-travel: 480 mmtotal power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 297 mmbore stroke: 120 mmspeeds: 8 / 75 - 1600 U/mintable-size: 500 x 460 mmspindle taper: MK 4 column diameter: 115 mmspindle feeds:: 3 / 0,1 - 0,26 mm/Udistance spindle /table: 715 mmdistance spindle/base plate: 1180 mmengine output: 1,5 kWtable rotating: 360 Gradweight of the machine ca.: 335 kgdimensions of the machine ca.: 0,5 x 0,76 x 1,89 mElectric 380 Volt: Cooling pump in machine base: Machinelight: Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment,electromagnetic feed engagement by means of snaps on the control lever.The machine has minor transport damage, see picture no. 6. This isa exhibition machine at a special price, so we are selling it without ...

x-travel: 450 mmy-travel: 400 mmz-travel: 480 mmcontrol: MillPlus IT V600 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 Nmtool taper: SK 40 swivellable: B: -95 / +30 °NC-Rotary table:: table surface area: Ø 450 mmT-slots: 7x 14 x 63 mmmax. table load: 250 kgrotatable: C: 360 °max. workpiecediameter: 380 mmmax. workpiece height: 670 mmtool magazin:: number of toolpositions: 16 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 8,0 kgfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/minFeed force ( X / Y / Z ): 7 / 13 / 10 kNtotal power requirement: 27,6 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,1 x 3,0 x 3,0 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: NC-rotar ...