trabalho de chapa metálica usadas para venda (3,233)

sheet width: 3100 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.5 mmcutting angle adjustment: 1.0 °back stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 21 Stückstrokes per minute: 18 - 31 oil volume: 160 LControl: ELGO P8511 column arm: 200 mmdistance between columns: 3050 mm0: max. 300 barvoltage: 400 Vmain drive: 9.0 kWweight of the machine ca.: 4800 kg.dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshopEquipment:- electro-hydraulic sheet metal shear swing cut- machine frame = all-steel welded construction- ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt- support table with ball rollers there are recessed grips between the table plates- front finger guard- hydraulically acting s ...

sheet width: 3100 mmplate thickness: 2 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/mintotal power requirement: 3,0 kWdimensions of the machine ca.: 3600 x 2200 x 1600 mmweight: 4500 kgEquipment:- Electric motorized backgauge- With digital ELGO position display- Manual cutting gap adjustment- 1x side stop with mm scale- 2x support arms- 1x freely movable double foot switch- Front finger guardSpecial accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 6 mmrear stop: 900 mmdown holder: 14 Stkno. of strokes: 20 Hub/mintotal power requirement: 10 kWdimensions of the machine ca.: 3100 x 2200 x 2600 mmweight: 5000 kgFeatures:- Central lubrication- Electric rear stop- 1x side stop 2350 mm- 2x front support arms with stop 1700 mm- Front finger guard- Spare blade (used)- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 125 mmplate thickness: 2 mmstraightening feed: 5-30 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 460 kgdimensions of the machine ca.: m- Belt infeed height: 1,250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 273 mmwall strength: 15,1 mmbending radius min.: 150 mmbending radius max.: 1250 mmtotal power requirement: 30 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 2050 mm: 2.0 mmmax. wire thickness: 3.0 mmUnderfloor: 110 mmmotor strength: 165 mmmotor strength: 22 kWbending speed: 5.2 mm/minlength: 3150 mmheight: 1150 mmwidth: 850 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: mMotorized adjustable backgauge with digital display up to 1000 mmPneumatic sheet metal supportSide fence and table extensionsCut length limiterCut edge lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMotorized backgauge with digital displayManual kerf adjustmentVariable cutting lengthCutting edge illuminationNew bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 10,00 tdimensions of the machine ca.: mMotorized backgauge up to 1000 mm with digital displaySide fence and table extensionsCut length limiterCut edge lightingNote: Backgauge is slightly inaccurate (+/- 1 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 750 mmplate length: 1250 mmplate thickness: 4 mmtable surface area: 1600 x 1050 mmno. of strokes: 180 Hub/minmax. punching diameter: 105 mmpunching pressure: 25 ttotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions: 1,9 x 1,9 x 1,7 mPunching and nibbling machine- Digital readout for X and Y axis- Tool cabinet with toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmdistance between columns: 1020 mmbending angle max.: 135 °total power requirement: 0 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1350 x 850 x 1175 mMax. bending angle 135°Manually operated with auxiliary spring on both sides.Upper beam opening 40 mm,Upper and lower beams segmented,Segment division: 25-30-35-40-45-50-75-100-150-200-270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 6 mmdistance between columns: 3200 mmspeed: . m/minrear stop: 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe backgauge is electric.The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale, our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us.You can find further offers on our website.Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm STplate thickness: 3 mm VAblade length: 225 mmengine output: 3,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1250 x 900 x 1100 mmFeatures:- 2x miter stops- 90° fixed angle- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1360 mmplate thickness: 06,0 mmdistance between columns: mmtable width: 455 mmwork height max.: 880 mmcutting angle: 1°30 °rear stop: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 12,0 mm: -: 0,5-3,0 °: 1000 mmtable height: 930 mmwork height max.: 930 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 600 mmz-travel: 600 mmcontrol: Heidenhain TNC 426spindle nose: 100-700 mmwork table:: 1.080 x 580 mmworkpiece weight max.: 550 kgT-slots: 7 Stk.T-slot - width: 14 mmtool piece magazine with: 36 Plätzenweight of tools max.: 8 kgtool length - max.: 340 mmtotal power requirement: kWweight of the machine ca.: 6,2 tdimensions of the machine ca.: 4.790 x 5.330 x 2.905 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 3 mmrear stop: von Hand, 750 mmnumber of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmNumber of working hours: 25.430 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4Equipment:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency stop button at front - CNC  ...

pressure: 170 tchamfer lenght: 3170 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 470 mmstroke: 200 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/sectable width: 180 mmtable height: 960 mmoil volume: 235 L0: 300 barcontrolled axis: 6 AnzahlNumber of working hours: 29.400 htotal power requirement: 16.5 KWweight of the machine ca.: 11910 kgrange L-W-H: 4025 x 2020 x 2900 mm well-maintained condition () with only approx. 29.400 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=APP0HZjMms4Equipment:- electro-hydraulic CNC press brake- AMADA CNC control OPERATEUR 2 - 6 axes (X, Y1 + Y2, R, Z1 + Z2) swiveling operation - front left tool & program library- CNC-controlled back stop adjustment (X-axis) adjustment range .. 700 mm- CNC-controlled vertical adjustment of the stop fingers (R-axis) adjustment range .. 25 ...

: 1550 mm: 2,0 mm: 1,5 mmroll diameter: oben 90 mm: 560 kg: 2580 x 700 x 1250 mm mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 1,5 mmdaylight opening: max. 85 mmweight of the machine ca.: 240 kgdimensions of the machine ca.: mSmallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness sLowering capability of the lower and bending beams 20 mmOn this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!The data for this ad was created with ModulMWS - the software sol ...

blade length: oben 211/unten 180 mmplate thickness: max. 6 mmround bar steel: max. 13 mmweight: ca. 19 kgSturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm.With compound action. Cuts sheet metals and round steel bar.Colour: Red-brownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bobina de mandrela dupla peso de cada lado: 1 tonelada Largura do material: 200 mm Diâmetro exterior da bobina: 2.050 mm Faixa de expansão: 350 - 640 mm Velocidade: 40 s.p.m. Potência necessária: 5,2 kW Peso da máquina aprox.: 2,2 tonelada

Desbobinador Peso da bobina: 2,5 tonelada Largura do material: 50 - 500 mm Diâmetro exterior da bobina: 1400 mm Faixa de expansão: 420 - 520 mm Nivelador / Endireitador Largura do material: 500 mm Número de rolos de nivelamento: 9 pcs. Diâmetro dos rolos de nivelamento: 50 mm Número de rolos de pinça: 2 pcs. Espessura do material: 6 mm Secção transversal: 3000 sq mm Velocidade de alimentação: 6 - 24 m / min