mandriladoras e centros de usinagem usadas para venda (3,154)

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm

bore capacity in steel (diameter):45 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mmELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total we ...

Heidenhain TNC 426/430M control Racing and Board: X-axis (longitudinal): 1,000 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 600 mm Table surface: 1,200 x 600 mm Maximum Table Load: 800 kg Speed 10,000 rpm (belt or direct drive) Tool Mount: SK 40 / BT 40 Spindle power: approx. 9 - 13 kW (S1/S6) Torque: ~82 Nm Fast Feeds: 30 m/min (X/Y/Z) Tool magazine: 24 spaces (basket or chain configuration with exchange arm) Tool Change Time: ~1.6 - 2.5 seconds (T-to-T) Total Weight: approx. 6,500 kg Floor space approx. 3,500 x 2,400 x 2,800 mm TOOLS NOT INCLUDED Auction-ID: A7-44885-2

x-travel:1000 mmy-travel:800 mmz-travel:800 mmweight of the machine ca.:24000 tdimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

travel -x axis: - mmtravel -y axis: - mmtravel -z axis: - mmcontrol: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/mintool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC & pallet changer.The machine is in a well-maintained condition, works in Switzerland.The machine and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: - mmtravel -y axis: - mmtravel -z axis: - mmcontrol: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/mintool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC & pallet changer.The machine is in a well-maintained condition, works in Switzerland.The machine and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C 22 | C22 | C-22 | C22U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

vertical machining center YANG EAGLE 600 X-axis travel: 600 mm Y-axis travel: 410 mm Z-axis travel: 450 mm Table dimensions: 700 x 400 mm Maximum Table Load: 300 - 350 kg Spindle Mount: BT-40 / ISO-40 Total machine weight: approx. 3,200 - 3,500 kg Floor Dimensions (W x D): Approx. 2,000 x 2,200 mm Maximum Height: 2,450 mm Auction-ID: A7-44885-12

Auction-ID: A7-45457-95

Hilti core drilling rig untested Auction-ID: A7-45427-139

x-travel:630 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:6,5 tNumber of axles:5 St.spindle turning speed range:18.000 U/minnumbers of tools in magazin:24 tool taper:SK 40 Round TableB-Axis

x-travel:800 mmy-travel:400 mmz-travel:350 mmtotal power requirement:44 kWweight of the machine ca.:8,8 tdimensions of the machine ca.:6,1 x 4,1 x 3,3 mtool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St.rotary table diameter:1340 mm

x-travel:800 mmy-travel:460 mmz-travel:510 mmtotal power requirement:20 kWweight of the machine ca.:8 tVertical Processing Centre20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

x-travel:560 mmy-travel:450 mmz-travel:450 mmtable surface area:760 x 410 mmturning speed range:8.000 U/mintotal power requirement:20 kWVertical Processing Centre

x-travel:600 mmy-travel:770 mmz-travel:675 mmtotal power requirement:47 kWweight of the machine ca.:13 tTool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axes

HERMLE C 1200 V – Vertical Machining Centre General data: Width: 3970 mm Depth: 4629 mm Height: 3050 mm Machine weight: 12700 kg Main drive: Number of spindles: 1 Spindle speed range: up to 16000 rpm Spindle motor power: 10 kW Tool taper: SK 40 Number of axes: 3 Movement: X-axis travel: 1200 mm Y-axis travel: 900 mm Z-axis travel: 500 mm Table: Table length: 1400 mm Table width: 900 mm Description: This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It is equipped with a robust clamping table (1400 x 900 mm) and a high-performance milling spindle delivering up to 10 kW power, torque up to 87 Nm, and speeds up to 16000 rpm. The machine is suitable for precise and complex machining operations and offers high reliability and durability. Additional information: The tool magazine can be dismantled, allowing the machine width to be reduced to approximately 2 ...

• CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx, 18 KW • Useful working area approx, 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  Electrospindle: power 7,50 KW-max, 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1,50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3,100 vacuum pump with capacity 100 m³/h • Operatin ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 €: 12 mm: 19 mm Weldon : 0.4 kW: 361 mm: 238 mm: 352 mm: 145 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThis special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operatein remote areas, where no power supply is available.The base includes very strong neodymium magnets and does not require any electricity to operate.PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicatethe current status of the drill and provide safety information.The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials.Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ahbattery pack.Features and benefits:• LED interface flashes green wheninadequate adh ...

number of spindles: 25 -1500 U/min Stufenlosbore capacity in steel (diameter): 23 mmbore stroke: 120 mmtable clamping surface:: 1250 x 340 mmtaper MK: MK3 total power requirement: 2 kWweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-45416-9

Auction-ID: A7-45416-7

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...

Auction-ID: A7-45416-4

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 €: 1 : 3100 mm: 6 mm: 0.5 - 3.5 °: 9,5 kW: 950 mm: 4070 mm: 2330 mm: 3400 mm: 1850 mm: 5500 kgMotorized backgauge 1000 mm, ball screws, digital displayCutting gap adjustment from the front with handwheelCutting length adjusmentCutting angle adjustmentDownholer safety guardRear safety via light barrierFoot pedalTable supports with ball bearings1 side arm 1500 mm2 support armsOperating manual in German with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-45416-2

Auction-ID: A7-45416-1

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabledisplaceable and rotatable drill headtiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-45416-6