trabalho de chapa metálica usadas para venda (3,363)

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 €: 572.81 €: 0.4 - 3.5 mm: 200 mm: 700 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length mm 2.500 Cutting thickness mm 6 Max cutting power KN 218 Back gauge travel mm 750 Cutting angle adjustment degrees 1.5 Strokes per minute 18 - 36 V-opening mm 30 Number of hold-downs n° 12 Length mm 2.995 Depth mm 1.750 Height mm 1.910 Approximate weight kg 4.500 Auction-ID: A1-48745-22

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92100 €: 1740.69 €: 3100 mm: 16 mm: 10 mm: 350 mm: 10 1/min: 2 °: 14 : 61 to: 1000 mm: 200 mm/s: 37 kW: 410 l: 2 Stk.: 818 mm: 550 mm: 3580 mm: 4550 mm: 2250 mm: 3825 mm: 2250 mm: 15000 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 €: 1840.86 €: 2050 mm: 30 mm: 30 mm: 25 mm: 25 mm: 20 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5000 mm: 2000 mm: 1900 mm: 11000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created with ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 €: 100.36 €: 1270 mm: 1.5 mm: 75 mm: 1.5 kW: 1830 mm: 700 mm: 1160 mm: 400 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchuser manual in GERMAN or ENGLISHOPTION (PRICE ON REQUEST):hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 €: 167.91 €: 250 mm: 6 mm: 3 mm: 25 1/min: 90 °: 4 kW: 950 mm: 780 mm: 1115 mm: 585 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 €: 133.17 €: 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 80 mm: 1450 mm: 1200 mm: 1640 mm: 260 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPNEUMATIC PRESSURE ARMALTERNATIVES (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080200 : prompt, Zwischenverkauf v : Türkei : 6550 €: 126.42 €: 1 : 1250 mm: 1.25 mm: 0.8 mm: 2 mm: 150 °: 500 mm: 200 mm: 1500 mm: 750 mm: 1715 mm: 315 kg: geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRCManual back gaugeAdjustable angle gaugeShelve and box for toolsMachine on rolls with brakesOperating manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090194 : prompt, Zwischenverkauf v : Spanien : 22400 €: 430.08 €: 1 : 1 : 60 to: 250 mm: 5 : 40 x 11 mm: 32 1/min: 350 x 15 mm: 120 x 10 mm: 45 / 40 mm: 10 mm: max. 150x10 mm: 5.5 kW: 1850 mm: 1300 mm: 2100 mm: 1390 kgwith bending station5 working stationsflat steel shear with device to reduce deformationangle iron shear with round- and squarebars openingtriangle notcherpunching stationpress brake device for flat steeltable at flat steel stationtable at notching stationlength stop 1000 mm with contact switch, for angle, flat or bar stationhydraulic drive2 foot releaseuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAIN TECHNICAL DATA • Punching Force: 180 kN (18 Tons) • Working range (X x Y): 2500 mm × 1250 mm (without repositioning) • Maximum sheet thickness: 6.4 mm • Maximum weight of the piece (sheet metal): 150 kg • Maximum punching diameter: 76 mm (single punching) PERFORMANCE AND SPEED • X-axis positioning speed: 90 m/min • Y-axis positioning speed: 60 m/min • Simultaneous speed (X+Y): 108 m/min • C-axis rotation speed: 180 rpm • Number of punching strokes: up to 900 strokes/min (1 mm pitch) • Number of marking/gnawing shots: up to 2200 strokes/min TOOL SYSTEM AND CNC • Numerical Control: CNC based on Bosch Type 3 • Tool magazine: Linear with 19 stations with 2 self-centering clamps • Tool rotation: 360° full rotation for all stations (all tools are rotating) • Multitool compatibility: Configuration from 19 to 190 tools in total (when using ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 €: 236.16 €: 1270 mm: 4 mm: 120 mm: 3 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1110 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 81500 €: 1540.35 €: 8 mm: 5 mm: 80 mm: 10 mm: 4500 mm: 720 mm: 95 (R 80) / 35 (R 25) mm: 11 kW: 4900 mm: 1700 mm: 2700 mm: 4550 kgincl. flanging rolls for mild steel (R25)incl. cutting bladetop and lower roll driven by hydromotor and plantary gear boxpossible to flange both, flat and crowned bottomshydraulically adjustable bottom heightcutting and flanging on the same headlateral support rollsoperator panel with touch screenOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 5 mmcutting length: 3000 mmrear stop: 750 mm total power requirement: 7,5-10 kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-49180-2

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT• Uncoiler• Coil car• Pneumatic input table• Entry guide• 7 Straightening rolls• Slitting shaft with 3 sets of quickly adjustable circular blades• Cut-to-length shears• ServomotorOPTIONS• Hydraulic input table• Film plastic device• Scrap rewinders• Additional circular blades• Stacking tables• Packers Model: Width to process: Cutting thickness (mm): Coil weight (kg) Number of straightening rolls: Cutting accuracy: Number of straightening rolls: Production speed: TwinCut 20 DM6 100012501500 0`5 - 2 6.000 3 - 6+/? 0`5 mm 2 + 7 20 m/min TwinCut 20 DM10 10.000 TwinCut 20 DM15 15.000 MATERIAL TO BE PROCESSED: THICKNESS: N OF SIMULTANEOUS CUTS: Steel 420 Nw/mm2 2`00 mm 3 1`50 mm 4 0`50 mm 6 Steel 700 Nw/mm2 1`25 mm 3 1`00 mm 4 0`50 mm 6 Steel 200 Nw/mm2 4`00 mm 3 2`00 mm 5 1`00 mm 6IF YOU ARE INTERESTED, P ...

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 160 mm: 45 mmmint condition86° Slightly cranked, planedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0081 : 177 €: 1 : 835 mm: 1 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0180 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 80 mm: 80 mm: 86° 10/15/20/30/40/50mm mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12.0 mm STplate thickness: 8.0 mm VAno. of strokes: 7 - 14 Hub/mindown holder: 18 Stückcutting angle: 0.5 - 3.0 °work height max.: 930 mmback stop - adjustable: 1000 mmControl: SP 8 total power requirement: 22.5 kWweight: 8500 kgrange L-W-H: 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition ()Equipment:- electro-hydraulic guillotine shear with guided blade beam- includes HACO NC control system SP 9 in like-new condition backgauge pre-selection positioning digital display of actual value electro-hydraulic cutting angle adjustment with digital display emergency stop switch- NC motorized backgauge on recirculating ball screws- manual blade gap adjustment, adjustable from the rear- front finger guard- 1x side gauge ... 1,000 mm- rear sheet metal chute- 1x movable foot pedal- operating manualThe data for this ad was creat ...

Equipped with foot control, including workbench. Auction-ID: A1-48474-261

Equipped with foot control, on and including work table lxbxh 255x115x85cm Auction-ID: A1-48474-19

Maximum Ø approximately: 8 mm Auction-ID: A1-48474-33

On and including table 50x50x90cm. Auction-ID: A1-48474-156

Auction-ID: A1-48474-104

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderALTERNATIVES (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

On and including work table lxbxh 170x90x85 Auction-ID: A1-48474-22

Auction-ID: A1-48474-105